To create multiple parallel lines (lanes) for a running track using the OFFSET command in AutoCAD, and to ensure they are placed on the current layer (LANES), follow these steps:
* Initiate the OFFSET command:
* Type OFFSET in the command line and press Enter.
* Set the offset distance:
* When prompted for the offset distance, type 10 and press Enter.
* Use the Layer option:
* To place the offset lines on the current layer, type L for Layer and press Enter.
* Select Current to ensure the new offset lines are created on the current layer (LANES).
* Select the Multiple option:
* To create multiple offsets at the same distance, type M for Multiple and press Enter.
* Create the offsets:
* Select the polyline (outside lane) as the object to offset.
* Click to the side where the offsets are to be created (inside of the original polyline).
* Repeat the clicks to create the necessary number of lanes.
This method ensures that each new lane is created at a consistent distance of 10 units from the previous one and that all new lanes are placed on the current layer.