Filter-Based Forwarding (FBF) in Junos OS allows traffic to be routed based on specific criteria such as source address, rather than just the destination address. This is useful in scenarios like policy routing or providing multiple paths for different types of traffic.
Step-by-Step Breakdown:
* Instance-Type Forwarding:You must create aninstance-type forwardingrouting instance. This routing instance allows for different routing tables based on the incoming packet filter.
* Command:
set routing-instances FBF-instance instance-type forwarding
* Match Filter:You need to create afilterto match the traffic that will be forwarded according to your custom routing policy. This filter is applied to an interface to determine which traffic will use the custom forwarding instance.
* Command Example:
set firewall family inet filter FBF-filter term 1 from source-address <address> set firewall family inet filter FBF-filter term 1 then routing-instance FBF-instance
* RIB Group:ARIB (Routing Information Base) groupis necessary to share routes between the primary routing table and the custom routing instance. This allows FBF traffic to use the routing information from other routing tables.
* Command Example:
set routing-options rib-groups FBF-group import-rib inet.0
set routing-instances FBF-instance routing-options rib-group FBF-group
Juniper Reference:
* FBF Configuration: Filter-based forwarding requires these specific steps to redirect traffic to a custom routing table based on filter criteria.