An engineer is adding an additional server to a chassis with 15 existing servers. The new server will NOT power on in any slot, even known good.
Existing server configuration
- Dual processor
- 256GB Memory
- PERC RAID Controller
- 2x 1TB 7200RPM SATA HDD
- QLogic Dual Port 10GbE Network Daughter Card (Fabric A)
- QLogic 16Gb Fibre Channel Mezz Card (Fabric B)
New server configuration
- Dual processor
- 192GB Memory
- No RAID
- Internal SD Card
- Intel Quad Port 1GbE Network Daughter Card (Fabric A)
- QLogic Dual Port 10GbE CNA Mezz Card (Fabric B)
The details of the chassis are as follows:
- Four 2700W Power Supplies
- Redundancy Policy is configured for Power Supply Redundancy
- Plugged into 220V AC
Power Monitoring logs show the original server's max draw as 418W each.
Which problem needs to be addressed to fix this issue?