An engineer has a blade chassis (VRTX) and is having connectivity issues.
The chassis has blades in SLOTS 1 and 2. A switch is installed in the chassis.
- Port channel 1 is for Server 1 interfaces
- Port channel 2 is for Server 2 interfaces
- Server interfaces are members of VLANs 10, 50, and 100
- External interfaces are in a port channel
- External interfaces are configured to pass traffic on VLAN 10, 50, and 100 Configuration info from Server interfaces and port channels:
Server Ports:
Switchport: enable
Administrative Mode: trunk
Operational Mode: up
Access Mode VLAN: 1
Port Channels 1 and 2:
Switchport: enable
Administrative Mode: access
Operational Mode: up
Access Mode VLAN: 1
Servers can NOT communicate with the network outside of the switch. Other systems can NOT communicate with the servers inside the chassis. The two servers can communicate with each other.
What does the engineer need to do to establish server communication?