Agree, can't be access point density required as their is no survey done and the customer wont be able to say what the density must be.
Suggestions for what the checklist, at a minimum, should contain:
• Customer contact information
• Total number of sites
• Number of buildings per site
• Hours of operation
• Hours during which the site survey can be performed
• Approximate square footage of facility
• Total number of users, minimum and maximum
• Packet size, average and maximum
• RF coverage information:
1. RF coverage inside and outside
2. Complete or selective RF coverage
3. Encryption to be utilized
4. Rate-shifting utilization
• Network infrastructure:
1. Existing network topology
2. Network speed 10/100/1000BASE-TX
3. Copper or fiber network media
4. If copper, Category 5 or Category 6 cabling
Site information:
• Ceiling heights
• Racking or shelving? If yes, describe construction
• Clearance above storage level
• Any hazardous areas?
• Is there a lift available?
• Special safety requirements such as steel-toe boots, hard hat, or safety glasses
• Is this a union facility?
• Is other non-WLAN RF equipment installed at the facility?
1. If so, which frequencies does the equipment use?
• Three main categories:
1. General questionnaire
2. Vertical specific
3. Technology-specific questionnaire
• Wi-Fi questionnaires may include:
1. General information
2. Location (site) information
3. Application information
4. Capacity information
Wi-Fi customer questionnaires may be used to request the following details from a customer:
• General information
• Location (site) information
• Application information
• Capacity information


David

The URL is broken 404, CUWSS quick reference guide does not refer to square feet, but does to access point density and clients to be used