Lab Simulation 9
Guidelines
This is a lab item in which tasks will be performed on virtual devices
- Refer to the Tasks tab to view the tasks for this lab item.
- Refer to the Topology tab to access the device console(s) and perform the tasks
- Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window
- All necessary preconfigurations have been applied
- Do not change the enable password or hostname for any device
- Save your configurations to NVRAM before moving to the next item
- Click Next at the bottom of the screen to submit this lab and move to the next question
- When Next is clicked the lab closes and cannot be reopened
Topology

Tasks
Physical connectivity is implemented between the two Layer 2 switches, and the network connectivity between them must be configured.
1. Configure an LACP EtherChannel and number it as 44; configure it between switches SW1 and SW2 using interfaces Ethemet0/0 and Ethernet0/1 on both sides. The LACP mode must match on both ends.
2. Configure the EtherChannel as a trunk link.
3. Configure the trunk link with 802.1q tags.
4. Configure VLAN 'MONITORING' as the untagged VLAN of the EtherChannel.