The /interface wireless access-list in MikroTik is used to define a set of rules that permit or deny wireless clients based on their MAC addresses and signal strength.
This list applies only to clients trying to connect to the router's wireless interface when it is configured as an Access Point.
Let's break down the options:
* A.#Correct - Used to allow or deny client MAC addresses and apply settings like rate limits, VLANs, etc.
* B.#That's the role of the registration table.
* C.#Security profiles are configured separately under /interface wireless security-profiles.
* D.#Hotspot authentication is handled via /ip hotspot, not wireless access lists.
MTCNA Wireless Module - MAC Access Control:
"Access-list matches incoming clients by MAC. You can allow, deny, and apply custom settings." Rene Meneses Study Guide - Wireless Security:
"Access-list is used to explicitly permit or block clients based on their MAC address." Terry Combs Notes - Wireless Filtering:
"Think of access-list like a whitelist/blacklist for Wi-Fi clients."