Comprehensive and Detailed In-Depth Explanation:
Understanding the BGP and IS-IS Network Topology in the Question:
* IS-IS Areas:
* Area 49.0001 (Level-1 IS-IS): Contains R1, R2, R4, R5.
* Area 49.0002 (Level-2 IS-IS): Contains R3, R6.
* R2 acts as an ABR (Area Border Router) and redistributes routes between Level-1 and Level-2 using import-route isis level-2 into level-1.
* BGP Route Reflection & Peering:
* R2 and R5 are Route Reflectors (RRs).
* iBGP peering is established among all routers (R1, R2, R3, R4, R5, R6).
* R1 and R4 import 192.168.1.0/24 into BGP, meaning this prefix will be advertised to all iBGP peers.
* R3 and R6 import 192.168.2.0/24 into BGP, meaning this prefix will also be advertised to all iBGP peers.
Route Distribution Analysis:
A: The route 192.168.2.0/24 in the routing table of R4 has two next hops. # (Correct)
* R3 and R6 import 192.168.2.0/24 into BGP.
* R2 and R5 (Route Reflectors) learn this route and reflect it to their clients (R1, R3, R4, R6).
* R4 receives two valid paths to 192.168.2.0/24 via R2 and R5 (both iBGP peers).
* Since both routes have the same BGP attributes and cost, they are installed as equal-cost paths in R4's routing table.
# Statement A is correct: The routing table of R4 has two next hops for 192.168.2.0/24.
B: The routing table of R1 contains two equal-cost default routes. # (Incorrect)
* In an IS-IS Level-1-2 setup, default routes are usually provided to Level-1 routers from an ABR (like R2).
* However, the question does not mention that R1 is receiving two default routes or that it is in an equal-cost multipath (ECMP) scenario.
* R1 may have only one default route, depending on route preference and cost.
# Statement B is incorrect: The routing table of R1 does not necessarily contain two equal-cost default routes.
C: The routing table of R4 contains two equal-cost default routes. # (Incorrect)
* Similar to R1, R4 is also a Level-1 router in IS-IS.
* If R4 were receiving default routes from multiple ABRs (R2 and R5), then it could have equal- cost paths.
* However, there is no indication that R4 is receiving two default routes in this scenario.
# Statement C is incorrect: The routing table of R4 does not necessarily contain two equal-cost default routes.
D: The routing table of R1 contains the route 192.168.2.0/24. # (Correct)
* R3 and R6 import 192.168.2.0/24 into BGP.
* R2 and R5 (Route Reflectors) reflect this route to their iBGP peers, including R1.
* Since R1 is an iBGP client of R2 and R5, it will receive 192.168.2.0/24 and install it in its routing table.
# Statement D is correct: The routing table of R1 contains the route 192.168.2.0/24.
Final Conclusion:
# A. The route 192.168.2.0/24 in the routing table of R4 has two next hops.# B. The routing table of R1 does not necessarily contain two equal-cost default routes.# C. The routing table of R4 does not necessarily contain two equal-cost default routes.# D. The routing table of R1 contains the route
192.168.2.0/24.
Thus, the correct answers are: A, D.