<< Prev Question Next Question >>
Question 38/51
You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely rather than on-site You have a colleague installing the switch. The colleague has provided you with a remote console session to configure the edge switch You have been asked to configure a link aggregation going back to the cores using interfaces 1/1/51 and 1/1/52. The Senior Engineer of the project has asked you to configure the switch and 1Q uplink with these guidelines
1. Add VLAN 20 to the local VLAN database with name Mgmt
2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet
3. Add LAG 1 using LACP mode active for the uplink
4. use vlan 20 as the native vlan on the LAG
5. Make sure the interfaces are all ON.
Which configuration script will achieve the task?
1. Add VLAN 20 to the local VLAN database with name Mgmt
2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet
3. Add LAG 1 using LACP mode active for the uplink
4. use vlan 20 as the native vlan on the LAG
5. Make sure the interfaces are all ON.
Which configuration script will achieve the task?
