The IP address of host PCA is 40.1.1.1, and the MAC address is 0011.1111.1111. It is connected to the GigabitEthernet1/0/1 port of switch SWA. The following commands are configured on switch SWA:
[SWA] vlan 10
[SWA-vlan10] quit
[SWA] vlan 20
[SWA-vlan20] protocol-vlan ipv4
[SWA-vlan20] quit
[SWA] vlan 30 [SWA-vlan30] quit
[SWA] mac-vlan mac-address 0011-1111-1111 vlan 30
[SWA] vlan 40
[SWA-vlan40] ip-subnet-vlan ip 50.1.1.0 255.255.255.0
[SWA-vlan40] quit
[SWA] interface GigabitEthernet 1/0/1
[SWA-GigabitEthernet1/0/1] port link-type hybrid
[SWA-GigabitEthernet1/0/1] port hybrid pvid vlan 10
[SWA-GigabitEthernet1/0/1] port hybrid vlan 10 20 30 40 untagged
[SWA-GigabitEthernet1/0/1] port hybrid protocol-vlan vlan 20 0
[SWA-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 40
[SWA-GigabitEthernet1/0/1] mac-vlan enable
[SWA-GigabitEthernet1/0/1] vlan precedence ip-subnet-vlan
After the configuration is complete, can you tell which one the PCA will join?