After executing the display interface Ethernet 1/0/1 command on the switch SWA, the output information is as follows:
[SWA] display interface Ethernet 1/0/1
Ethernet1/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0 (sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Port priority: 0
what can we learn from the above information? (Multiple choice)