A. Setting up local authentication is connected mode is the fastest way of enabling wireless at a remote location as it does not require any WLAN configuration.

B. Local authentication can be enabled only on the WLAN of a FlexConnect AP that is in local switching mode.

C. In connected mode, the AP provides minimal information about the locally authenticated client to the controller. This information is not available to the controller: policy type, access VLAN, VLAN name, supported rates, encryption cipher.

D. Careful planning must be undertaken when setting up local authentication as it increases the latency requirements of the branch office.

E. In connected mode, the access point provides minimal information about the locally authenticated client to the controller. However, the following information is available to the controller policy type, acces VLAN, VLAN name, supported rates and, encryption cipher.