Frame Relay Sim:
type show frame-relay map and show running-config to get its configuration.

If required, what password should be configured on the router in the MidEast branch office to allow a connection to be established with the Dubai router?
Correct Answer:
Explanation/Reference:
This question is not clear for a long time but now maybe the trick was solved. What Cisco wants to ask is the word used as password, not the type of connection, so in the exam you might see some strange words for answers like "En8ble", "T1net", "C0nsole". All you have to do is to use the command "show running- config" as wx4 mentioned below to find the answer.
wx4 commented:
Q4: if password required which?
in my example it was connection to North!
How to figure out which pw is required?
#show running-config
1. check the interface to the router you need connection to. If there is "ppp authentication" you need a password!
2. you will find the password on the top of your running-config output
check the area:
username North password c0nsole
username xxxxx yyyyy
username...
in my case it was c0nsole, in your case it can be no password needed or a different password.
If you are still not clear, please read anton's comment:
A big question I noticed here was about the FR Lab regarding the password. You have to perform a show running-config and look for USERNAME and PASSWORD.
i.e.
username South_Router password c0nsol3
username North_Router password t31net
Obviously this has to be en PPP encapsulation, if asked for a posible password for SOUTH_ROUTER you pick c0nsol3, and for NORTH_ROUTER you pick t31net. If you're running HDLC, i would pick "no password is required".
Simulations