Valid HPE0-S50 Dumps shared by ExamDiscuss.com for Helping Passing HPE0-S50 Exam! ExamDiscuss.com now offer the newest HPE0-S50 exam dumps, the ExamDiscuss.com HPE0-S50 exam questions have been updated and answers have been corrected get the newest ExamDiscuss.com HPE0-S50 dumps with Test Engine here:
No.# B, D, E - You also need two 12Gb SAS ICMs to be full redundant.
Ron - May 27, 2019
No.# C - In Service Software Update (ISSU), SUM is not used here.
Ron - May 27, 2019
No.# C - The boot order must be right, no need to disable the RAID controller.
Ron - May 27, 2019
No.# C - Uplink bandwidth will decrease as half of the uplink ports are no longer available.
Ron - May 27, 2019
No.# D - This is the Data Network, and there are LIGs that are managed with Composer.
Ron - May 27, 2019
No.# D - Memory on a compute module is no resource you can manage using Composer, it is present or not on the compute module.
Ron - May 27, 2019
No.# A - 36 ( 3 x 12 ), the SY 480 Gen9 is a half height compute module and you can connect up to 3 frames with 20 Gb.
Ron - May 27, 2019
No.# C - Only one support dump is stored on the appliance. The old one can be copied to a USB device before creating a new one.
Don - May 27, 2019
No.# B- You will require 8 AOC cables, as every 20 Gbit ILM is connected with 2 cables ( 10Gbit + 10Gbit )
Don - May 27, 2019
No.# To get 4 x 40 Gbit you can not use Spanning Tree, the protocol will shut down any redundant path. B with MLAG and cross connect is the right answer.
Ron - May 27, 2019
No.# Should be C, as Image Streamer is used for OS image management and delivering OS images using iSCSI boot.
Recent Comments (The most recent comments are at the top.)
No.# A is right answer
No.# B, D, E - You also need two 12Gb SAS ICMs to be full redundant.
No.# C - In Service Software Update (ISSU), SUM is not used here.
No.# C - The boot order must be right, no need to disable the RAID controller.
No.# C - Uplink bandwidth will decrease as half of the uplink ports are no longer available.
No.# D - This is the Data Network, and there are LIGs that are managed with Composer.
No.# D - Memory on a compute module is no resource you can manage using Composer, it is present or not on the compute module.
No.# A - 36 ( 3 x 12 ), the SY 480 Gen9 is a half height compute module and you can connect up to 3 frames with 20 Gb.
No.# C - Only one support dump is stored on the appliance. The old one can be copied to a USB device before creating a new one.
No.# B- You will require 8 AOC cables, as every 20 Gbit ILM is connected with 2 cables ( 10Gbit + 10Gbit )
No.# To get 4 x 40 Gbit you can not use Spanning Tree, the protocol will shut down any redundant path. B with MLAG and cross connect is the right answer.
No.# Should be C, as Image Streamer is used for OS image management and delivering OS images using iSCSI boot.
No.# FLMs are connected to the Management Network
No.# You have to connect the two VC Master Modules together using Q7 and Q8, MLAG on the Uplink
No.# A - you can not mix 20GB FLMs with 10GB FLMs in a logical enclosure.
No.# C is the right Answer, the guide is available in the documentation library
No.# Answer B is out dated ,now the answer is (oca) one configuration advanced.