Explanation/Reference:
How to Create an iSCSI LUN
The following steps are completed on the system that is providing the storage device.
(B) 1.Create a ZFS storage pool.
Example: target# zpool create sanpool mirror c2t3d0 c2t4d0
(C)2. Create a ZFS volume to be used as a SCSI LUN.
(D)3. Create a LUN for the ZFS volume.
Example:
target# stmfadm create-lu /dev/zvol/rdsk/sanpool/vol1
Logical unit created: 600144F0B5418B0000004DDAC7C10001
4. Confirm that the LUN has been created.
Example
target# stmfadm list-lu
LU Name: 600144F0B5418B0000004DDAC7C10001
(F) 5. Add the LUN view.
This command makes the LUN accessible to all systems.
target# stmfadm add-view 600144F0B5418B0000004DDAC7C10001
How to Create the iSCSI Target
This procedure assumes that you are logged in to the local system will contains the iSCSI target.
Note: The stmfadm command manages SCSI LUNs. Rather than setting a special iSCSI property on the ZFS volume, create the volume and use stmfadm to create the LUN.
(H) 1. Enable the iSCSI target service.
target# svcadm enable -r svc:/network/iscsi/target:default
(I) 2. Create the iSCSI target.
target# itadm create-target
Reference: Oracle Solaris Administration: Devices and File Systems, Configuring iSCSI Devices With COMSTAR