-- Exhibit --
user@host> show security flow session
...
Session ID. 41, Policy name: allow/5, Timeout: 20, Valid
In: 172.168.66.143/43886 --> 192.168.100.1/5000;tcp, If: ge-0/0/1.0, Pkts: 1, Bytes: 60 Out: 10.100.1.100/5555 --> 172.168.66.143/43886;tcp, If: ge-0/0/2.0, Pkts: 0, Bytes: 0 user@host> show configuration
...
security {
nat {
destination {
pool server {
address 10.100.1.100/32 port 5555;
}
rule-set rule1 {
from zone UNTRUST;
rule 1 {
match {
destination-address 192.168.100.1/32;
destination-port 5000;
}
then {
destination-nat pool server;
}
}
}
}
proxy-arp {
interface ge-0/0/1.0 {
address {
192.168.100.1/32;
}
}
}
}
policies {
from-zone UNTRUST to-zone TRUST {
policy allow {
match {
source-address any;
destination-address any;
application [ junos-ping tcp-5000 ];
}
then {
permit;
}
}
}
}
zones {
security-zone TRUST {
interfaces {
ge-0/0/2.0 {
host-inbound-traffic {
protocols {
all;
}
}
}
}
}
security-zone UNTRUST {
interfaces {
ge-0/0/1.0 {
host-inbound-traffic {
system-services {
ping;
}
}
}
}
}
}
}
applications {
application tcp-5000 {
protocol tcp;
destination-port 5000;
}
}
-- Exhibit --
Click the Exhibit button.
Your customer is attempting to reach your new server that should be accessible publicly using
192.168.100.100 on TCP port 5000, and internally using 10.100.100.1 on TCP port 5555. You notice a session forms when they attempt to access the server, but they are unable to reach the server.
Referring to the exhibit, what will resolve this problem?