In an EVPN-VXLAN Edge-Routed Bridging (ERB) architecture, also known as a collapsed fabric, the Layer 3 default gateway functionality is moved from the core/spine layer down to the edge (the leaf or distribution layer).
* Anycast Gateways: To support seamless host mobility and redundancy, multiple distribution/leaf switches are configured with the same anycast IP address and MAC address on their IRB interfaces for a given VLAN. This allows a host to move between different switches without needing to update its default gateway configuration or ARP cache.
* Distributed Routing: Routing occurs locally at the edge (distribution layer). Traffic destined for a different subnet is routed by the first switch it hits (the ingress leaf), rather than being backhauled to a central core router.
* Symmetric vs. Asymmetric IRB: Junos OS 24.4 supports both models, but the ERB design typically utilizes symmetric routing for better scalability, where each leaf only needs to know the routes for its locally connected VNIs and uses a transit VNI for inter-subnet communication.
Option A is incorrect because while unique IPs can be used (Method 1 in some docs), the defining characteristic of an efficient ERB design is the use of shared Anycast IPs for the gateway. Option C describes a Centrally-Routed Bridging (CRB) design, not ERB.