-- Exhibit --
ns5gt-> get int eth2
Interface ethernet2:
description ethernet2
number 8, if_info 704, if_index 0, mode route
link up, phy-link up/full-duplex
status change:7, last change:09/26/2012 23:08:22
vsys Root, zone Untrust, vr trust-vr
dhcp client disabled
PPPoE disabled
admin mtu 0, operating mtu 1500, default mtu 1500
*ip 171.211.111.111/30 mac 0014.f693.edc8
*manage ip 171.211.111.111, mac 0014.f693.edc8
route-deny disable
pmtu-v4 disabled
ping disabled, telnet enabled, SSH disabled, SNMP disabled
web enabled, ident-reset disabled, SSL disabled
DNS Proxy disabled, webauth disabled, g-arp enabled, webauth-ip 0.0.0.0 OSPF disabled BGP disabled RIP disabled RIPng disabled mtrace disabled
PIM: not configured IGMP not configured
MLD not configured
NHRP disabled
bandwidth: physical 100000kbps, configured egress [gbw 0kbps mbw 0kbps] configured ingress mbw 0kbps, current bw 0kbps
total allocated gbw 0kbps
DHCP-Relay disabled at interface level
DHCP-server disabled
-- Exhibit --
You are the administrator of a NetScreen 5GT. For troubleshooting purposes, you must be able to ping untrusted interfaces.
Referring to the exhibit, how do you enable ping for interface eth2?