The terminal uses Agent for 802.1x authentication, the IP address of SC and Radius server is 172.18.10.68, and it always prompts network communication failure during authentication;
Viewing the Radius authentication log shows that the Radius authentication is successful and the authorization is ACL3001. The switch configuration is as follows:
dot1x enable
dot1x authentication-method eap
radius-server template lzy
radius-server shared-key simple 123456
radius-server authentication 172.18.10.68 1812
radius-server accounting1 72.1 3.10.63 1813
radius-server authorization 172.18.10.68 shared-key simple 123456
aaa
authentication-scheme default
authentication-scheme auth
authentication-mode radius
accounting-scheme acco
accounting-mode radius
accounting realtime 3
domain default
authentication-scheme auth
accounting-scheme acco
radius-server lzy
interface GigabitEthernet0/0/14
description connect 222
port hybrid pvid vlan 105
port hybrid untagged vlan 105
dot1x enable
acl number 3001
rule 1 permit ip destination 172.18.100.235 0
rule 2 permit ip destination 172.18.100.237 0
rule 10 deny ip
What could be the reason for the failure of network communication?