In the following BGP networking applications, EBGP neighbor relationships are established between the three routers. RTA receives Internet routes from RTB and RTC at the same time, so that it can reach the Internet 192.10.0.0/ through two links. 16.
The main configurations of RTA, RTB, and RTC are as follows:
RTA]
bgp 700
network 190.10.0.0 mask 255.255.0.0
undo snchronization
group as500 external
peer as500 as-path-acl 1 export
peer 201.1.1.1 group as500 as-number 500
group as600 external
peer as600 as-path-acl 1 export
peer 160.1.1.1 group as600 as-number 600
ip as-path-acl 1 permit ^$
RTB]
bgp 500
network 192.10.0.0 mask 255.255.0.0
undo snchronization
group as700 external
peer as700 route-policsetmed export
peer 201.1.1.2 group as700 as-number 700
route-policsetmed permit node 10
applcost 50
RTC]
bgp 600
network 192.10.0.0 mask 255.255.0.0
undo snchronization
group as700 external
peer as700 route-policsetmed export
peer 160.1.1.2 group as700 as-number 700
route-policsetmed permit node 10
applcost 100
According to the above configuration, which router will pass through the 190.10.0.0/16 network segment on RTA to access the 192.10.0.0/16 network segment?
Which attribute of BGP routing determines the principle of route selection through this router?