Increasing the glazing area in an office building affects various aspects of energy consumption due to changes in heat gain, heat loss, and natural light availability, but it does not influence all buildingsystems. The EDGE User Guide explains the impacts of glazing: "Increasing the glazing area (window-to-wall ratio, WWR) in an office building typically increases cooling demand due to higher solar heat gain, increases heating demand in colder climates due to greater heat loss through windows, and reduces lighting energy by allowing more natural daylight, assuming proper daylighting design" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option A (cooling demand) is affected, as more glazing increases solar heat gain: "Higher WWR leads to greater cooling loads in hot climates due to increased solar radiation entering the building" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option B (heating demand) is also impacted, particularly in cooler climates: "Larger glazing areas increase heat loss in cold climates, raising heating demand due to the lower thermal resistance of windows compared to walls" (EDGE User Guide, Section 4.1: Insulation Measures). Option C (lighting energy) is affected, as more glazing can reduce the need for artificial lighting: "Increased glazing can lower lighting energy by enhancing daylight penetration, provided glare is controlled" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). However, Option D (hot water demand) is not impacted by glazing area, as hot water use is tied to occupant activities (e.
g., showers, cleaning) rather than building envelope design: "Hot water demand in EDGE is determined by occupant use patterns, such as the number of showers or laundry cycles, and is not influenced by glazing area or WWR" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). The EDGE User Guide further confirms: "Glazing area impacts energy-related metrics like cooling, heating, and lighting, but has no direct effect on hot water demand, which is calculated separately based on usage assumptions" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Therefore, increasing glazing area does not impact hot water demand (Option D).
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods, Section 4.2: Water Savings Calculations.