When configuring the connection between a Cisco MDS 9700 Series Multilayer Director and a Cisco Nexus
5672UP switch, it's important to consider the following:
* Ensure compatibility: Verify that both devices are running compatible NX-OS versions to ensure they
* can communicate properly.
* Configure interfaces: Set up the interfaces on both devices with the appropriate type (E, F, or TE), speed, and other relevant settings.
* Establish connectivity: Use the show interface command to confirm that the interfaces are up and the show flogi database command to verify that the Fibre Channel login has been successful.
* Zoning configuration: Configure zoning on the MDS 9700 to control access between devices connected to the fabric.
* VSAN setup: Ensure that the Virtual Storage Area Network (VSAN) is correctly configured and that both switches are part of the same VSAN if required for the topology.
References:
* Cisco MDS 9700 Series Multilayer Directors documentation1.
* Cisco Nexus 5672UP switch documentation