Explanation/Reference:
Explanation:
Enabling PPPoE in a VPDN Group
Perform this task to enable PPPoE in a virtual private dial-up network (VPDN) group.
Restrictions
This task applies only to releases prior to Cisco IOS Release 12.2(13)T.
SUMMARY STEPS
1. enable
2. configure terminal
3. vpdn enable
4. vpdn-group name
5. request-dialin
6. protocol pppoe
DETAILED STEPS
Command or Action Purpose
Step 1 enable Enables privileged EXEC mode.
Example: Enter your password if
Router> enable prompted.
Step 2 configure terminal Enters global configuration mode.
Example:
Router# configure terminal
Step 3 vpdn enable Enables virtual private dialup
Example: networking.
Router(config)# vpdn enable
Step 4 vpdn-group name Associates a VPDN group with a Example: customer or VPDN profile.
Router(config)# vpdn-group
group1
Step 5 request-dialin Creates a request-dialin VPDN Example: subgroup.
Router(config-vpdn)# request-
dialin
Step 6 protocol pppoe Enables the VPDN subgroup to
Example: establish PPPoE
Router(config-vpdn-req-in)# pro
tocol pppoe
Reference:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/ftpppoec_support_TSD_Island
_of_Content_Chapter.html