300-075 Exam Dumps | You have deployed a centralized call processing solution with a multicast MOH server at your central

<< Prev Question Next Question >>

Question 12/430

You have deployed a centralized call processing solution with a multicast MOH server at your central site on a different VLAN from your Cisco Unified Communications Manager servers and IP phones. When central site users place calls on hold, dead air or silence is heard. Which two actions will resolve this issue? (Choose two.)

A. Enable multicast routing on all the routers at the central site.

B. Decrease the TTL configuration in the Cisco Unified Communications Manager server to 0 so that the multicast packets only go to the VLAN that contains the Cisco Unified Communications Manager server and IP phones.

C. Increase the TTL in the configuration of the MOH server to 2 so that packets can cross the VLAN boundary.

D. Configure ip-sparse mode on the router interfaces and increase the TTL on the routers to 2.

E. Enable multicast routing on only those router interfaces that connect the voice and MOH VLANs.

F. Keep the TTL at 1 for the MOH server and increase the TTL for IP multicast routing to 2 on router interfaces.

Question List (430q): Question 1: Which action configures the registration of transcoder resou...; Question 2: When configuring intercluster URI dialing, an engineer gets ...; Question 3: Which two options enable routers to provide basic call handl...; Question 4: Which task must you perform before deleting a transcoder?...; Question 5: When considering Extension Mobility, what happens if a user ...; Question 6: An engineer is performing an international multisite deploym...; Question 7: Scenario: There are two call control systems in this item. T...; Question 8: Which two options are requirements for hardware MTP on Cisco...; Question 9: Refer to the exhibit. (Exhibit) How many calls are permitted...; Question 10: In Cisco Unified Manager, where can you configure the defaul...; Question 11: A presales engineer is working on a quote for a major custom...; Question 12: You have deployed a centralized call processing solution wit...; Question 13: In a node-specific Service Advertisement Framework forwarder...; Question 14: Refer to the exhibit. (Exhibit) The exhibit shows centralize...; Question 15: Scenario: There are two call control systems in this item. T...; Question 16: Which code snippet is required for SAF to be initialized?...; Question 17: What is the maximum allowed round-trip time between Cisco Un...; Question 18: You are the Cisco Unified Communications Manager in Certpape...; Question 19: Which two actions ensure that the call load from Cisco TeleP...; Question 20: Which type of search message appears in the Cisco TelePresen...; Question 21: Which field must be populated to assign a default directory ...; Question 22: You have been asked to deploy Cisco Extension Mobility Cross...; Question 23: Which two results occur in SRST mode if the pickup command i...; Question 24: Refer to the exhibit. (Exhibit) If an IP phone in San Jose r...; Question 25: An engineer is configuring URI calling within the same clust...; Question 26: The administrator at Company X is getting user reports of in...; Question 27: Widgets.com's Cisco TelePresence Video Communication Server ...; Question 28: When you configure QoS on VCS, which settings do you apply i...; Question 29: An engineer is troubleshooting a dial path etc" and it gives...; Question 30: An engineer must resolve a call failure issue. When using RT...; Question 31: Which two statements about Cisco Unified Communications Mana...; Question 32: On which Cisco Unified Communications Manager configuration ...; Question 33: Which statement about Service Advertisement Framework is tru...; Question 34: Which three steps are necessary to configure mobile and remo...; Question 35: Refer to the exhibit. (Exhibit) An engineer receives a ticke...; Question 36: Which message can a Cisco VCS use to monitor the Presence st...; Question 37: When a SIP trunk is added for Call Control Discovery, which ...; Question 38: Company X has three locations connected via a low bandwidth ...; Question 39: What happens if location-based CAC is used and there is no b...; Question 40: What is the purpose of the local route group?...; Question 41: DRAG DROP Drag and drop the Cisco Unified Communications Man...; Question 42: Which action configures transcoding resources in Cisco Unifi...; Question 43: Which two features require or may require configuring a SIP ...; Question 44: An engineer is setting up a Cisco VCS Cluster with SIP endpo...; Question 45: On which two call logs is the media encryption enforced in a...; Question 46: The network administrator has been investigating bandwidth i...; Question 47: In Cisco Unified Communications Manager, where do you config...; Question 48: Scenario: There are two call control systems in this item. T...; Question 49: Which statement about Enhanced Location-based CAC on a Cisco...; Question 50: Which configuration command disables the secondary dial tone...; Question 51: Which minimum configuration is needed for the SAF Internal C...; Question 52: An MOH server is configured to stream a local .wav file that...; Question 53: An Enterprise Alternate Number is not reachable in GDPR. Wha...; Question 54: You have deployed a Cisco 2821 ISR to perform as an SRST voi...; Question 55: Refer to the exhibit. (Exhibit) Assume that NANP is being us...; Question 56: How long is the default keepalive period for SRST in Cisco I...; Question 57: With Cisco Extension Mobility, when a user logs in to a phon...; Question 58: Which two call scenarios are supported by AAR? (Choose two.)...; Question 59: Which CAC configuration on a gatekeeper restricts to 10 G.71...; Question 60: Which two options are functionalities of subzones in a Cisco...; Question 61: A CUCM Cluster has been setup with one-to-one (1:1) call pro...; Question 62: Company X currently uses a Cisco Unified Communications Mana...; Question 63: Which two entities could be represented by device mobility g...; Question 64: Refer to the exhibit. (Exhibit) Which configuration change i...; Question 65: After forgetting to log out of his IP phone in the main offi...; Question 66: Which two types of trunks can support Cisco Unified Communic...; Question 67: The administrator at Company X is trying to set up Extension...; Question 68: Which two statements about Cisco Unified Mobility are true? ...; Question 69: Which three options describe the main functions of SAF Clien...; Question 70: Which two statements about configuring mobile and remote acc...; Question 71: When an incoming PSTN call arrives at an H.323 gateway, how ...; Question 72: Which two statements about remote survivability are true? (C...; Question 73: Where do you specify the device mobility group and physical ...; Question 74: When Cisco Extension Mobility is implemented, how is the aud...; Question 75: Which three devices or applications support call preservatio...; Question 76: Which symbol is required for globalized call routing?...; Question 77: Which protocol can you use to create a trunk between Cisco U...; Question 78: Refer to the exhibit. (Exhibit) Which pattern will be advert...; Question 79: Which two statements about Cisco Unified Communications Mana...; Question 80: An engineer is working on a Cisco VCS Control routing config...; Question 81: Scenario: There are two call control systems in this item. T...; Question 82: The network administrator of Enterprise X receives reports t...; Question 83: Which device is needed to integrate H.320 into the Cisco vid...; Question 84: Which trunk should you use in an H.323 gatekeeper-controlled...; Question 85: Which of the following are two functions that ensure that th...; Question 86: Refer to the exhibit. (Exhibit) What is the correct value to...; Question 87: Refer to the exhibit. (Exhibit) The exhibit shows centralize...; Question 88: In a cluster-wide deployment, what is the maximum number of ...; Question 89: In a Centralized Call processing architecture, you have depl...; Question 90: In the case of a VCS cluster, which configuration element is...; Question 91: What is the default DSCP value for Cisco TelePresence calls ...; Question 92: How is a SIP trunk in Cisco Unified Communications Manager c...; Question 93: Which statement about the SAF Client Control is correct?...; Question 94: An engineer is configuring a new DX-80 in Cisco Unified Comm...; Question 95: Which two configurations provide the best SIP trunk redundan...; Question 96: Which two items must you configure in Cisco Unified Communic...; Question 97: Which command displays the detailed configuration of all the...; Question 98: An engineer is configuring a SIP profile for Cisco VCS SIP t...; Question 99: Enabling authentication and encryption for CTI, JTAPI, and T...; Question 100: What is the standard Layer 3 DSCP media packet value that sh...; Question 101: Which device is used to connect to the H.323 gatekeeper?...; Question 102: When implementing a Media Termination Point, what determines...; Question 103: Cisco Unified border element is configured to support RSVP-b...; Question 104: Which three commands can be used to verify SRST fallback mod...; Question 105: When you use the Query wizard to configure the trace and log...; Question 106: Which statement about RSVP is true?...; Question 107: For which VoIP protocol does a gatekeeper provide address tr...; Question 108: Refer to the exhibit. (Exhibit) What must be configured on t...; Question 109: Which three commands are necessary to override the default C...; Question 110: How many Cisco Unified Mobility destinations can be configur...; Question 111: Which three messages does a Cisco VCS use to monitor the Pre...; Question 112: What is a prerequisite of AAR deployment?...; Question 113: With Media Gateway Control Protocol configuration on the voi...; Question 114: Which configuration does Cisco recommend for the peer addres...; Question 115: Which command can be used to manually send the MGCP gateway ...; Question 116: Which process can localize a global E.164 with + prefix call...; Question 117: What happens when a user logs in using the Cisco Extension M...; Question 118: To which subzone can you apply bandwidth limitations?...; Question 119: Which two statements are true when considering a Cisco VoIP ...; Question 120: What are the tasks required to route calls from H323 to SIP ...; Question 121: Which statement about the function of a gatekeeper is true?...; Question 122: Which three devices support the SAF Call Control Discovery p...; Question 123: What is the difference between an H.323 gateway and a SIP ga...; Question 124: Refer to the exhibit. (Exhibit) The exhibit shows a SAF Forw...; Question 125: Which solution is needed to enable presence and extension mo...; Question 126: Company X has a Cisco Unified Communications Manager cluster...; Question 127: As a voice operations engineer, you need to standardize the ...; Question 128: Which statement about enrollment in the IP telephony PKI is ...; Question 129: When video endpoints register with Cisco Unified Communicati...; Question 130: Which three options are supplementary services that are affe...; Question 131: How do you configure the secondary dial tone option for SRST...; Question 132: Which two options are requirements for deploying an H.323 ga...; Question 133: You have deployed a Cisco 2821 ISR to perform as an SRST voi...; Question 134: Which two statements regarding you configuring a traversal s...; Question 135: Which statement about TEHO is true?...; Question 136: When configuring Cisco Unified Survivable Remote Site Teleph...; Question 137: Which option is a valid test scenario to verify that Cisco U...; Question 138: Which three configuration settings are included in a default...; Question 139: Which two bandwidth management parameters are available duri...; Question 140: Video calls using 384 kbps need to be supported across a gat...; Question 141: Which two options are valid service parameter settings that ...; Question 142: Company X has clusters deployed in three different countries...; Question 143: Where in the Cisco Unified Communications Manager Administra...; Question 144: Refer to the exhibit. (Exhibit) Assume that the HQ phones ha...; Question 145: Which two statements about the functionality of a gatekeeper...; Question 146: Scenario: There are two call control systems in this item. T...; Question 147: Which option configures call preservation for H.323-based SR...; Question 148: Refer to the exhibit. (Exhibit) You have configured transcod...; Question 149: When an external call is placed from Ajax, they would like t...; Question 150: A Cisco 3825 needs to be added in Cisco Unified Communicatio...; Question 151: While configuring Call Survivability in Cisco Unified Commun...; Question 152: Refer to the exhibit. (Exhibit) The HQ site uses area code 6...; Question 153: Which statement about AAR functionality is true?...; Question 154: (Exhibit) Assume a centralized Cisco Unified Communications ...; Question 155: When you configure Cisco Unified Communications Manager, you...; Question 156: Company X has a primary and a backup Cisco Unified Communica...; Question 157: Which option is known as the location attribute that the glo...; Question 158: Which three characters should you avoid entering in the desc...; Question 159: Which three CLI commands are used when configuring H.323 cal...; Question 160: Which three statements about configuring an encrypted trunk ...; Question 161: When configuring a secure SIP trunk, to which Cisco Unified ...; Question 162: Which two options must be selected in the SIP Trunk Security...; Question 163: Which sign is prefixed to the number in global call routing?...; Question 164: Refer to the following exhibits. (Exhibit) Users in the U.S ...; Question 165: Refer to the following exhibit. (Exhibit) The MGCP gateway h...; Question 166: In Cisco Unified Communications Manager, where do you config...; Question 167: When using Cisco Unified Communications Manager Express in S...; Question 168: When an incoming PSTN call arrives at an MGCP gateway, how d...; Question 169: What user profile is used to define the settings for a user ...; Question 170: Refer to the exhibit. (Exhibit) How does the Cisco Unified C...; Question 171: Which two statements about international multisite dial plan...; Question 172: Which two statements regarding IPv4 Static NAT address 209.1...; Question 173: Which codec is recommended by Cisco for multisite music on h...; Question 174: In a Cisco Unified Communications Manager centralized call p...; Question 175: Refer to the exhibit. (Exhibit) What music on hold audio sou...; Question 176: What is required to effectively use the Cisco CTL client to ...; Question 177: Refer to the exhibit. (Exhibit) The HQ site uses area code 6...; Question 178: What is the default DSCP/PHB values for TelePresence streami...; Question 179: DRAG DROP Click and drag the minimum Cisco Unified SRST conf...; Question 180: An engineer must ensure that a device registers to Cisco VCS...; Question 181: You are deploying a remote office setup that connects with C...; Question 182: An administrator is setting up analog phones that connect to...; Question 183: Which system configuration is used to set audio codecs?...; Question 184: Scenario: There are two call control systems in this item. T...; Question 185: Refer to the exhibit. An engineer is setting up a new deploy...; Question 186: When considering Cisco Unified Communications Manager Groups...; Question 187: Refer to the exhibit. (Exhibit) An engineer receives a ticke...; Question 188: Refer to the exhibit. (Exhibit) The HQ Cisco Unified Communi...; Question 189: Refer to the exhibit. (Exhibit) Multicast MOH needs to be ru...; Question 190: Which two statements about symmetric encryption are true? (C...; Question 191: Refer to the exhibit. (Exhibit) How many calls can be placed...; Question 192: Which two actions are performed by the Call Control Discover...; Question 193: The Cisco Unified Communications system of a company has fiv...; Question 194: Which three statements are true in order for inbound PSTN ca...; Question 195: Company X has a Cisco Unified Communications Manager cluster...; Question 196: Scenario: There are two call control systems in this item. T...; Question 197: Which technologies provide remote-site redundancy for Cisco ...; Question 198: Refer to the exhibit. (Exhibit) Locations-based CAC has been...; Question 199: Your company's main number is 408-526-7209, and your employe...; Question 200: Which two features or functions can be implemented without u...; Question 201: Which device must be responsible for properly marking networ...; Question 202: Which two steps must you take when implementing TEHO in your...; Question 203: A video endpoint is configured with SIP only. What does a vi...; Question 204: How can the location setting be modified to resolve poor cal...; Question 205: Which three items must you configure to enable SAF Call Cont...; Question 206: During device failover to the secondary Cisco Unified Commun...; Question 207: Refer to the exhibit. Why are Cisco Unified IP Phones 9971 a...; Question 208: What is the default value for the Drop Ad Hoc Conference ser...; Question 209: Refer to the exhibit. (Exhibit) When the Cisco Unified Commu...; Question 210: Refer to the exhibit. (Exhibit) What should the destination ...; Question 211: When multiple Cisco Extension Mobility profiles exist, which...; Question 212: Which two statements describe RSVP-enabled locations-based C...; Question 213: When a call is made from a video endpoint to a Cisco TelePre...; Question 214: What are the two tasks that you must perform to configure th...; Question 215: Which three of the following are steps in configuring MGCP F...; Question 216: Which DSCP service parameter can be configured for Cisco TS ...; Question 217: Which commands are needed to configure Cisco Unified Communi...; Question 218: Refer to the exhibit. (Exhibit) How does the Cisco Unified C...; Question 219: Which two statements about Cisco Unified Mobility are true? ...; Question 220: What is the fastest way for an engineer to test the implemen...; Question 221: You want to perform Media Gateway Control Protocol gateway m...; Question 222: Your company's main number is 408-526-7209, and your employe...; Question 223: Which feature enables users to manage business calls by usin...; Question 224: The corporate WAN has been extended to two newly acquired si...; Question 225: Refer to the exhibit. (Exhibit) Which configuration elements...; Question 226: When you configure regions in a Cisco Unified Communications...; Question 227: This is the configuration on the voice gateway: telephony-se...; Question 228: Which three steps are required to configure a SIP trunk on C...; Question 229: Refer to the exhibit. (Exhibit) Which statement about the co...; Question 230: What is the default DSCP/PHB for video conferencing packets ...; Question 231: A voice engineer is enabling video capabilities between H.32...; Question 232: Which statement about technology implementation strategy is ...; Question 233: Refer to the exhibit. (Exhibit) Which three statements about...; Question 234: Which action configures AAR to route the calls that have bee...; Question 235: A Cisco Unified Communications Manager cluster is installed ...; Question 236: Which statement is not true about GARP?...; Question 237: How many hosted DN patterns per cluster does Cisco Unified C...; Question 238: Which two statements about the use of the Intercluster Looku...; Question 239: Which feature allows you to specify which endpoints ring whe...; Question 240: Which zone will the VCS Control use to route calls to the VC...; Question 241: Which statement is true regarding the configuration of SAF F...; Question 242: You need to verify if the Media Gateway Control Protocol gat...; Question 243: Which two statements describe a transcoder? (Choose two.)...; Question 244: How is the region assigned to a device such as an IP phone?...; Question 245: A new administrator at Company X has deployed a VCS Control ...; Question 246: Which DSCP value and PHB equivalent are the default for audi...; Question 247: Which two options should be used to create a secure traversa...; Question 248: Which two configurations can you perform to allow Cisco Unif...; Question 249: An engineer opens up a TAC case and wants to implement CCD\S...; Question 250: How does the system intelligently shift call processing upon...; Question 251: Which system configuration is used to set a restriction on a...; Question 252: Company A has deployed a VCS Control and is attempting to re...; Question 253: Which three options are overlapping parameters for roaming w...; Question 254: In the event that the central CUCM is unreachable, how will ...; Question 255: Which method can be used to address variable-length dial pla...; Question 256: Which parameter prevents the Cisco TelePresence Video Commun...; Question 257: You want to avoid unnecessary interworking in Cisco TelePres...; Question 258: An engineer implemented a VCS as a gateway to allow SIP and ...; Question 259: Which parameter should be set to prevent H.323 endpoints fro...; Question 260: When an incoming PSTN call arrives at an H.323 gateway, how ...; Question 261: When an H.323 trunk is added for Call Control Discovery, whi...; Question 262: Which two options are mandatory requirements for setting up ...; Question 263: Which component provides a list of Cisco Unified Communicati...; Question 264: You are configuring a SIP trunk with ID337054322 on Cisco Un...; Question 265: When Cisco Extension Mobility is implemented, which CSS is u...; Question 266: Assume that local route groups are configured. When an IP ph...; Question 267: An engineer is configuring URI calling within the same clust...; Question 268: An engineer is configuring Global Dial Plan Replication and ...; Question 269: Which feature can be used to manipulate the calling party nu...; Question 270: Which statement best describes globalized call routing in Ci...; Question 271: (Exhibit) An engineer is deploying a new Cisco VCS Expresswa...; Question 272: Refer to the exhibit. (Exhibit) Which statement is true?...; Question 273: Which statement describes locations based CAC?...; Question 274: Which component of Cisco Unified Communications Manager is r...; Question 275: When you configure TEHO for long-distance calls and use the ...; Question 276: Refer to the exhibit. (Exhibit) The HQ site uses area code 6...; Question 277: Which three steps configure Cisco Unified Survivable Remote ...; Question 278: Which remote-site redundancy technology fails over to POTS d...; Question 279: Which two are gatekeeper-controlled trunk options that suppo...; Question 280: Refer to the exhibit. (Exhibit) The Cisco Unified Communicat...; Question 281: Which Cisco IOS command is used for internal SAF Clients to ...; Question 282: Which module is the minimum PVDM3 module needed to support v...; Question 283: Which three commands are mandatory to implement SRST for fiv...; Question 284: Select two commands. One of which can be used to verify Cisc...; Question 285: What is the purpose of configuring a hardware-based MTP when...; Question 286: Scenario: There are two call control systems in this item. T...; Question 287: In which two locations can you verify that a phone has a sta...; Question 288: Which two Cisco Extension Mobility attributes are available ...; Question 289: Where do you go to configure restrictions on audio bandwidth...; Question 290: An engineer has configured a Cisco EX60 to register with a C...; Question 291: When you configure a globalized dial plan, in which three wa...; Question 292: Up to how many Cisco unified Communications Manager nodes ca...; Question 293: Which action configures phones in site A to use G.711 to sit...; Question 294: Cisco Unified Communications Manager is configured with CAC ...; Question 295: To preserve analog calls in an MGCP switchback event, which ...; Question 296: An engineer is configuring URI calling within the same clust...; Question 297: The administrator at Company X is trying to set up Extension...; Question 298: Which two options are effective mechanisms to restrict the m...; Question 299: A voice-mail product that supports only the G.711 codec is i...; Question 300: Which statement about the function of the "+" symbol in the ...; Question 301: Refer to the exhibit. (Exhibit) IT shows an H.323 gateway co...; Question 302: Which ability does the Survivable Remote Site Telephony feat...; Question 303: When configuring a video ISDN gateway, which two actions are...; Question 304: Which three options are Cisco VCS zone types? (Choose three....; Question 305: Which two configurations are needed to implement SRST in Cis...; Question 306: Which gateway does the Cisco Unified Communications Manager ...; Question 307: Which three configuration settings are included in a default...; Question 308: Which bandwidth amounts are correct for configuring location...; Question 309: Refer to the exhibit. (Exhibit) Which trunks would be most s...; Question 310: You recently implemented call redundancy at a new remote sit...; Question 311: Refer to the exhibit. (Exhibit) A PSTN call arrived at the M...; Question 312: Refer to the exhibit. (Exhibit) What media resource should b...; Question 313: Scenario: There are two call control systems in this item. T...; Question 314: Which interface can you use to configure alarms and traces i...; Question 315: Which two options for a Device Mobility-enabled IP phone are...; Question 316: Refer to the exhibit. (Exhibit) All HQ phones are configured...; Question 317: When you connect a Cisco VCS Control to Cisco Unified Commun...; Question 318: An administrator is visiting a remote site that has on-net c...; Question 319: Assume that the Cisco IOS SAF Forwarder is configured correc...; Question 320: Which situation requires TCP port 443 to be open for packets...; Question 321: Which two have to be defined in the Forward All field? (Choo...; Question 322: Refer to the exhibit. (Exhibit) The HQ site uses area code 6...; Question 323: Where can you change the clusterwide DSCP setting for Cisco ...; Question 324: Which option describes the meaning of a call termination cau...; Question 325: Which device must be accessible from the public Internet in ...; Question 326: Refer to the exhibit. (Exhibit) An engineer is deploying a n...; Question 327: The network administrator at Enterprise X is creating the gu...; Question 328: Which option is a benefit of implementing CFUR?...; Question 329: If the device pool in the phone record does not match the de...; Question 330: Which two roaming sensitive settings, in the Device Pool Con...; Question 331: Which three globalization dialing functions are enhanced in ...; Question 332: In what Cisco solution is Simple Network-Enabled Auto Provis...; Question 333: Company X wants to implement RSVP-based Call Admission Contr...; Question 334: Which action configures CAC utilizing only Cisco Unified Com...; Question 335: Which two options are configuration steps on Cisco Unified C...; Question 336: Which statement is true when considering a Cisco VoIP enviro...; Question 337: (Exhibit) Refer to the exhibit. An engineer is troubleshooti...; Question 338: When device mobility mode is enabled or disabled for a clust...; Question 339: Refer to the exhibit. (Exhibit) Which option describes the e...; Question 340: Which component is needed to set up SAF CCD?...; Question 341: Which statement is correct about AAR?...; Question 342: Which command is needed to utilize local dial peers on an MG...; Question 343: When using SAF, how do you prevent multiple nodes in a clust...; Question 344: Refer to the exhibit. (Exhibit) Which option describes the e...; Question 345: What component acts as a user agent for both ends of a SIP c...; Question 346: Refer to the exhibit. (Exhibit) Which CSS is used at the HQ ...; Question 347: What command is used to map internal extensions to the corre...; Question 348: Refer to the exhibit. (Exhibit) HQ_MRGL is assigned to the H...; Question 349: An engineer must enable video desktop sharing between a Cisc...; Question 350: Which three steps are required when configuring extension mo...; Question 351: If delegated credentials checking has been enabled and remot...; Question 352: Refer to the exhibit. (Exhibit) The "DSCP for Video Calls" C...; Question 353: Which function can be implemented without MTP resources?...; Question 354: Which option describes a function of SIP preconditions?...; Question 355: Which command should you use on the gatekeeper to specify th...; Question 356: Refer to the exhibit. (Exhibit) Assuming the regions configu...; Question 357: A local gateway is registered to Cisco TelePresence Video Co...; Question 358: Refer to the exhibit. (Exhibit) A user in RTP calls a phone ...; Question 359: When you configure a region to use the G.729 codec, which ot...; Question 360: A voicemail product that supports only the G.711 codec is in...; Question 361: Which two configurable options are available to enable Early...; Question 362: The following exhibit shows configs for H.323 gateway. You h...; Question 363: What impact do roaming-sensitive settings and Device Mobilit...; Question 364: How many nodes can a phone establish a connection to at the ...; Question 365: What is the difference between an MGCP gateway and a SIP gat...; Question 366: (Exhibit) Refer to the exhibit. The exhibit shows centralize...; Question 367: When considering Cisco Unified Communications Manager failov...; Question 368: Which two formats are supported by Cisco Unified Communicati...; Question 369: Which two statements regarding the Cisco VCS search and tran...; Question 370: The VCS Expressway can be configured with security controls ...; Question 371: Which two options should be selected in the SIP trunk securi...; Question 372: When configuring Cisco Unified Mobility, which parameter con...; Question 373: In Cisco Unified Communications Manager, where can you confi...; Question 374: Refer to the exhibit. (Exhibit) To permit three G.729 calls,...; Question 375: If you want to delete a SAF-enabled trunk from Cisco Unified...; Question 376: Which Cisco IOS command is used to verify that the Cisco Uni...; Question 377: Scenario: There are two call control systems in this item. T...; Question 378: Company X has deployed a VCS Control with a local zone and a...; Question 379: Which functionality does ILS use to link all hub clusters in...; Question 380: Which three tests can you perform to verify redundancy in th...; Question 381: If your IP telephony administrator asks you to configure a l...; Question 382: While operating in SRST, what is needed to route calls outsi...; Question 383: Which statement best describes a Media Termination Point?...; Question 384: An update of the configuration using the Cisco CTL client no...; Question 385: In a distributed call processing network with locations-base...; Question 386: Which statement about SIP precondition is most correct?...; Question 387: Which two statements about SAF service identifier numbers ar...; Question 388: Which Cisco IOS command is used to verify that a SAF Forward...; Question 389: Which two gateways of trunks are considered to be call-agent...; Question 390: When configuring Cisco Unified Mobility, which parameter def...; Question 391: Which statement is true when device mobility mode is enabled...; Question 392: Which E.164 transformation pattern represents phone numbers ...; Question 393: Which statement about setting up FindMe in Cisco TelePresenc...; Question 394: How are Cisco IP Phones directly configured to utilize local...; Question 395: Which DNS SRV Records must be configured on the external DNS...; Question 396: An engineer is performing an international multisite deploym...; Question 397: Refer to the exhibit. (Exhibit) When the Manager places a ca...; Question 398: Which statement about configuring the Cisco VCS Control and ...; Question 399: Which two options are dial plan elements that Global Dial Pl...; Question 400: When an incoming PSTN call arrives at an MGCP gateway, how d...; Question 401: How many active gatekeepers can you define in a local zone?...; Question 402: Which statement about H.323 Gatekeeper Call Admission Contro...; Question 403: You are deploying a Cisco Unified Communications Manager sol...; Question 404: Which statement about the host portion format in Cisco Unifi...; Question 405: What are two requirements for configuring an Intercluster Tr...; Question 406: Which option indicates the best QoS parameters for interacti...; Question 407: An engineer is configuring Global Dial Plan Replication. On ...; Question 408: While troubleshooting a connectivity issue between Cisco Uni...; Question 409: What is the purpose of a region?...; Question 410: What is an advantage of TEHO?; Question 411: Which two statements are true regarding the implementation o...; Question 412: Which action is performed by the Media Gateway Control Proto...; Question 413: Which two locations are the best locations that an end user ...; Question 414: Which action configures PSTN backup for calls that are rejec...; Question 415: Which option best describes a service that assembles a netwo...; Question 416: How do RSVP-enabled locations differ from Cisco Unified Comm...; Question 417: Refer to the exhibit. (Exhibit) With the Mobile Connect feat...; Question 418: When implementing a dial plan for multisite deployments, wha...; Question 419: What is the default DSCP/PHB for TelePresence video conferen...; Question 420: Refer to the exhibit. (Exhibit) To stream multicast MOH to t...; Question 421: You want to configure Cisco VCS SIP endpoints and H.323 endp...; Question 422: What are two important considerations when implementing TEHO...; Question 423: Refer to the exhibit. (Exhibit) When a user presses a speed ...; Question 424: Which option configures the secondary dial tone option for S...; Question 425: Which option describes the reason that transcoding resources...; Question 426: Scenario: There are two call control systems in this item. T...; Question 427: When configuring CAPF, user intervention is required when us...; Question 428: Scenario: There are two call control systems in this item. T...; Question 429: What is the purpose of a SAF Client?...; Question 430: The Cisco Unified Communications system of a company has fiv...

Question 12/430

LEAVE A REPLY

Download PDF File